Components

Place the components on a blanket to avoid scratches
on the floor and on the product.

Step 1

Place one of the shelves on a blanket or other soft
surface on the floor with the downside facing upwards.
Lay the legs of one side next to each other with holes facing up.

Step 2

Start with securing one leg at a time to the shelf, preferebly the midlle leg
if your product contains 6 legs in total, by mounting the screw (B) and bracket (A) into the hole.
Using the ball end of the allen key (C), tighten the screw until firmly connected with the leg.

Step 3

Repeat Step 2 for all the rest of the legs on one side.

Step 4

Carefully turn the product over so it lies on the legs as shown below.
Repeat Step 3 for the next shelf/shelves

Step 5

One by one, place the remaining legs on the other side to one shelf at a time
by repeating Step 2-4. Now you can raise the shelf on its legs.

Gently wiggle the shelf so that the connections can settle. At this point it is good
to go through and re-tighten the screws to be sure everything is aligned and tight

Step 6

Only for Leaf Shelf 0.5 x 5 The Leaf Shelf 0.5×5 comes with included wall-mount brackets. Please note that the shelf can be used without mounting the metal brackets. However, we recommend securing it to the wall for added safety and stability, especially in households with children or pets.